![]() ![]() User profile name(): (insert a strong password here)Īt this stage, your OLT is ready to be interconnected with SmartOLT system. User Password(length): (insert a strong password here)Ĭonfirm Password(length): (confirm the password) This user/pass will be used by SmartOLT to connect to your OLT. Press Enter again to confirm the save action of both data and configuration.Ĭreate a dedicated username/password. make sure the default gateway IP address 10.100.0.1 is already configured on your router. Reconnect to the OLT on the new IP address 10.100.0.2.Īdd the default gateway and save configuration: ![]() Now your OLT boards should be in Normal or Active_normal status.Ĭonfigure your allocated management IP address for this OLT, in this example it's 10.100.0.2, with default gateway 10.100.0.1 on the out-of-band meth0 ETH interface: Then open a telnet connection to the OLT.ĭisplay and confirm the detected OLT boards.Ī list with the OLT boards will be displayed.Ĭonfirm the boards that have the Auto_find status: ![]() Verify connectivity by pinging 10.11.104.2, you should receive replies. Configure the IP address 10.11.104.1/255.255.255.0 on your PC or on the ethernet port of the Mikrotik where the OLTs' management port is connected.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |